Liverpool Tanks and clearomizers starter bundle (2.0 ohm regular) (v3)
Tanks and clearomizers advice for Liverpool, covering licensing, what to look for and where the trade-offs actually sit.
We spent weeks putting tanks and clearomizers options through their paces so the recommendations here reflect real use. Two things to check before ordering: the Micro-USB socket on the base and whether the 2.0 Ω regular coil is the newer generation.
Anyone who has compared tanks and clearomizers options in Liverpool quickly learns that specification lists only tell part of the story. For loyal customers, the learning curve is shorter than the specification list suggests, and daily use is straightforward from the first charge.
Comparing this against a 55:45 PG/VG setup shows the difference clearly: one favours flavour, the other favours volume. The 3.5 ml capacity is a genuinely useful middle ground: enough liquid for a long session without turning the device into a pocket problem. Expect roughly 718 full puffs from a charge at 6 mg/ml, based on average session length in our testing.
Replacement coils are widely available, and the 2.0 Ω regular coil is the sensible default to keep in stock. The included spare coils are useful for the first fortnight, after which you will be ordering your own. What surprised us most was how little the 2.0 Ω regular coil changes the draw character compared with the 55:45 PG/VG liquid sitting in the chamber.
The Stealth Grey finish hides fingerprints far better than the gloss options, which matters more than it sounds on a device handled daily. Worth noting that the Q-Plus takes a small amount of care to keep clean, which we cover in the maintenance section below. For loyal customers, the learning curve is shorter than the specification list suggests, and daily use is straightforward from the first charge.
Airflow control on the Geekvape Aegis is adjustable enough to move from a warm, restrained draw to something far more open without removing the tank. Vapour production is more than adequate at 80, and pushing beyond that adds heat rather than anything worth carrying. Expect roughly 718 full puffs from a charge at 6 mg/ml, based on average session length in our testing.
Flavour tracking stays consistent from the first day to roughly the 2.0 Ω regular mark before the profile flattens and a swap makes sense. In Liverpool, availability of the 2.0 Ω regular coil is the practical bottleneck, not the device itself. The standard bore mouthpiece is comfortable over long sessions and resists the condensation that gathers on narrower tips.
Specifications
Every unit in the Geekvape Aegis family shares the same core platform, so the differences come down to the numbers below.
| Reference model | Geekvape Aegis |
|---|---|
| Brand family | AEKU |
| Battery capacity | 650 mAh |
| Power range | 80 W |
| Liquid capacity | 3.5 ml |
| Coil | 2.0 Ω regular |
| Bottle size | 1.3 ml |
| Liquid ratio | 55:45 PG/VG |
| Nicotine strength | 6 mg/ml |
| Material | zinc alloy |
| Charge port | Micro-USB |
| Connector | Q-Plus |
| Airflow | fixed |
| Mouthpiece | standard bore |
Flavour and performance notes
A representative profile is Watermelon Chill: sweet, juicy, described as watermelon with a clean cooling exhale. On a 55:45 PG/VG ratio this reads clearly on the first day and holds its character to roughly the 2.0 Ω regular mark before the coil begins to mute it.
Practical considerations in Liverpool
Availability in Liverpool is the factor that decides most outcomes here. Confirm the 2.0 Ω regular and the Micro-USB are both in stock before committing, and check that the Q-Plus matches your existing device if you already own hardware. Duty and GBP rates move, so treat prices as current rather than fixed.
If you would rather talk it through, use the contact details below and we will answer directly.
