Where to buy Tanks and clearomizers in Liverpool (0.8 ohm regular) (v2)
Tanks and clearomizers advice for Liverpool, covering replacement policy, what to look for and where the trade-offs actually sit.
Most Liverpool buyers start with a well-known brand name and then discover that fit and coil availability matter far more. Flavour tracking stays consistent from the first day to roughly the 1.0 Ω mesh mark before the profile flattens and a swap makes sense.
Most Liverpool buyers start with a well-known brand name and then discover that fit and coil availability matter far more. The 3.0 ml capacity is a genuinely useful middle ground: enough liquid for a long session without turning the device into a pocket problem.
Vapour production is more than adequate at 100, and pushing beyond that adds heat rather than anything worth carrying. Materials are unremarkable on paper and feel reassuringly solid in the hand, with no flex in the body at all. The instruction booklet is thin, but the diagrams are clear enough that most people set the device up without further help.
If you take one thing from this page, make it the coil compatibility check. A device that needs a coil you cannot source locally becomes an expensive ornament within a month. The throat hit is noticeably firmer than a 50:50 PG/VG blend, so if you prefer a smoother draw, mix accordingly. Pricing in Liverpool shifts with import duty, so the figures here reflect current GBP rates rather than a fixed list price.
Flavour tracking stays consistent from the first day to roughly the 1.0 Ω mesh mark before the profile flattens and a swap makes sense. In Liverpool, availability of the 1.0 Ω mesh coil is the practical bottleneck, not the device itself. The wide bore mouthpiece is comfortable over long sessions and resists the condensation that gathers on narrower tips.
The included spare coils are useful for the first fortnight, after which you will be ordering your own. Comparing this against a 50:50 PG/VG setup shows the difference clearly: one favours flavour, the other favours volume. The 3.0 ml capacity is a genuinely useful middle ground: enough liquid for a long session without turning the device into a pocket problem.
The build quality on IQOS III is a step above most of what sits in the same price bracket, and the finish resists the chipping that usually shows after a few months of pocket carry. Build quality is the quiet differentiator here, with tight seams and a connector that has not loosened after repeated removal. Charging over USB-C takes about 68 from empty, and the pass-through means the device can be used while plugged in on the smaller batteries.
Specifications
Here is what the engineering actually delivers, without the marketing language.
| Reference model | IQOS III |
|---|---|
| Brand family | Innokin |
| Battery capacity | 2000 mAh |
| Power range | 100 W |
| Liquid capacity | 3.0 ml |
| Coil | 1.0 Ω mesh |
| Bottle size | 100 ml |
| Liquid ratio | 50:50 PG/VG |
| Nicotine strength | 0 mg/ml |
| Material | polycarbonate |
| Charge port | USB-C |
| Connector | Q-Plus |
| Airflow | dual bottom |
| Mouthpiece | wide bore |
Flavour and performance notes
A representative profile is Raspberry Lemonade: sweet, tart, described as summer lemonade with a raspberry accent. On a 50:50 PG/VG ratio this reads clearly on the first day and holds its character to roughly the 1.0 Ω mesh mark before the coil begins to mute it.
Practical considerations in Liverpool
Availability in Liverpool is the factor that decides most outcomes here. Confirm the 1.0 Ω mesh and the USB-C are both in stock before committing, and check that the Q-Plus matches your existing device if you already own hardware. Duty and GBP rates move, so treat prices as current rather than fixed.
If any of the above addresses what you were trying to solve, the rest of the pages in this section cover it in more detail.
