Tanks and clearomizers prices in Liverpool for 2026 (Innokin X)
Tanks and clearomizers advice for Liverpool, covering B2B, what to look for and where the trade-offs actually sit.
Anyone who has compared tanks and clearomizers options in Liverpool quickly learns that specification lists only tell part of the story. In Liverpool, availability of the 1.4 Ω mesh coil is the practical bottleneck, not the device itself.
We spent weeks putting tanks and clearomizers options through their paces so the recommendations here reflect real use. Vapour production is more than adequate at 50, and pushing beyond that adds heat rather than anything worth carrying.
Replacement coils are widely available, and the 1.4 Ω mesh coil is the sensible default to keep in stock. The included spare coils are useful for the first fortnight, after which you will be ordering your own. What surprised us most was how little the 1.4 Ω mesh coil changes the draw character compared with the 65:35 PG/VG liquid sitting in the chamber.
Build quality is the quiet differentiator here, with tight seams and a connector that has not loosened after repeated removal. The Forest Green finish hides fingerprints far better than the gloss options, which matters more than it sounds on a device handled daily. Worth noting that the Q-Plus takes a small amount of care to keep clean, which we cover in the maintenance section below.
Pricing in Liverpool shifts with import duty, so the figures here reflect current GBP rates rather than a fixed list price. Airflow control on the Beipu B2 is adjustable enough to move from a warm, restrained draw to something far more open without removing the tank. Vapour production is more than adequate at 50, and pushing beyond that adds heat rather than anything worth carrying.
Comparing this against a 65:35 PG/VG setup shows the difference clearly: one favours flavour, the other favours volume. The 1.6 ml capacity is a genuinely useful middle ground: enough liquid for a long session without turning the device into a pocket problem. Expect roughly 875 full puffs from a charge at 0 mg/ml, based on average session length in our testing.
Specifications
Specifications vary by batch, so treat these figures as the reference point rather than a guarantee for every unit.
| Reference model | Beipu B2 |
|---|---|
| Brand family | Asvape |
| Battery capacity | 3000 mAh |
| Power range | 50 W |
| Liquid capacity | 1.6 ml |
| Coil | 1.4 Ω mesh |
| Bottle size | 30 ml |
| Liquid ratio | 65:35 PG/VG |
| Nicotine strength | 0 mg/ml |
| Material | anodised aluminium |
| Charge port | Type-C fast charge |
| Connector | Q-Plus |
| Airflow | dual bottom |
| Mouthpiece | narrow bore |
Flavour and performance notes
A representative profile is Cola Zero: sweet, fizzy, described as cola sweetness with a light fizz. On a 65:35 PG/VG ratio this reads clearly on the first day and holds its character to roughly the 1.4 Ω mesh mark before the coil begins to mute it.
Practical considerations in Liverpool
Availability in Liverpool is the factor that decides most outcomes here. Confirm the 1.4 Ω mesh and the Type-C fast charge are both in stock before committing, and check that the Q-Plus matches your existing device if you already own hardware. Duty and GBP rates move, so treat prices as current rather than fixed.
If any of the above addresses what you were trying to solve, the rest of the pages in this section cover it in more detail.
