Setup Tanks and clearomizers explained (Kiwi Lime)
Tanks and clearomizers advice for Liverpool, covering setup, what to look for and where the trade-offs actually sit.
We spent weeks putting tanks and clearomizers options through their paces so the recommendations here reflect real use. Two things to check before ordering: the Type-C fast charge socket on the base and whether the 0.8 Ω regular coil is the newer generation.
Finding the right tanks and clearomizers in Liverpool is easier than most catalogues make it sound. Delivery across Liverpool is typically two to four working days with tracked dispatch, and returns are straightforward within the standard window.
We would pair the Innokin Sceptre with a 30:70 PG/VG liquid, which is where the balance between throat hit and cloud density sits most comfortably. Replacement coils are widely available, and the 0.8 Ω regular coil is the sensible default to keep in stock. The included spare coils are useful for the first fortnight, after which you will be ordering your own.
The Emerald finish hides fingerprints far better than the gloss options, which matters more than it sounds on a device handled daily. Worth noting that the 510-X takes a small amount of care to keep clean, which we cover in the maintenance section below. For experienced users, the learning curve is shorter than the specification list suggests, and daily use is straightforward from the first charge.
Delivery across Liverpool is typically two to four working days with tracked dispatch, and returns are straightforward within the standard window. The build quality on Innokin Sceptre is a step above most of what sits in the same price bracket, and the finish resists the chipping that usually shows after a few months of pocket carry. What surprised us most was how little the 0.8 Ω regular coil changes the draw character compared with the 30:70 PG/VG liquid sitting in the chamber.
The instruction booklet is thin, but the diagrams are clear enough that most people set the device up without further help. Flavour tracking stays consistent from the first day to roughly the 0.8 Ω regular mark before the profile flattens and a swap makes sense. In Liverpool, availability of the 0.8 Ω regular coil is the practical bottleneck, not the device itself.
The throat hit is noticeably firmer than a 30:70 PG/VG blend, so if you prefer a smoother draw, mix accordingly. The wide bore mouthpiece is comfortable over long sessions and resists the condensation that gathers on narrower tips. Comparing this against a 30:70 PG/VG setup shows the difference clearly: one favours flavour, the other favours volume.
Charging over Type-C fast charge takes about 89 from empty, and the pass-through means the device can be used while plugged in on the smaller batteries. Two things to check before ordering: the Type-C fast charge socket on the base and whether the 0.8 Ω regular coil is the newer generation. For experienced users, the learning curve is shorter than the specification list suggests, and daily use is straightforward from the first charge.
Specifications
The specification sheet is where the real trade-offs show.
| Reference model | Innokin Sceptre |
|---|---|
| Brand family | Lost Vape |
| Battery capacity | 800 mAh |
| Power range | 65 W |
| Liquid capacity | 4.0 ml |
| Coil | 0.8 Ω regular |
| Bottle size | 300 ml |
| Liquid ratio | 30:70 PG/VG |
| Nicotine strength | 3 mg/ml |
| Material | zinc alloy |
| Charge port | Type-C fast charge |
| Connector | 510-X |
| Airflow | dual bottom |
| Mouthpiece | wide bore |
Flavour and performance notes
A representative profile is Frozen Berry Sorbet: sweet, icy, described as cold berry inhale with a soft exhale. On a 30:70 PG/VG ratio this reads clearly on the first day and holds its character to roughly the 0.8 Ω regular mark before the coil begins to mute it.
Practical considerations in Liverpool
Availability in Liverpool is the factor that decides most outcomes here. Confirm the 0.8 Ω regular and the Type-C fast charge are both in stock before committing, and check that the 510-X matches your existing device if you already own hardware. Duty and GBP rates move, so treat prices as current rather than fixed.
Take the time to get it right the first time; the difference shows up over months of use rather than days.