Diy Mixers guide to Tanks and clearomizers (updated) (1.6 ml)
Tanks and clearomizers advice for Liverpool, covering starter kits, what to look for and where the trade-offs actually sit.
Budget matters in Liverpool, but with tanks and clearomizers the cheapest option is rarely the one that lasts. What surprised us most was how little the 1.4 Ω mesh coil changes the draw character compared with the 20:80 PG/VG liquid sitting in the chamber.
Search results for tanks and clearomizers in Liverpool are crowded, which is why this page focuses on what actually changes the experience. We would pair the Innokin X with a 20:80 PG/VG liquid, which is where the balance between throat hit and cloud density sits most comfortably.
Comparing this against a 20:80 PG/VG setup shows the difference clearly: one favours flavour, the other favours volume. The 3.0 ml capacity is a genuinely useful middle ground: enough liquid for a long session without turning the device into a pocket problem. Expect roughly 1136 full puffs from a charge at 10 mg/ml, based on average session length in our testing.
Replacement coils are widely available, and the 1.4 Ω mesh coil is the sensible default to keep in stock. The included spare coils are useful for the first fortnight, after which you will be ordering your own. What surprised us most was how little the 1.4 Ω mesh coil changes the draw character compared with the 20:80 PG/VG liquid sitting in the chamber.
Flavour tracking stays consistent from the first day to roughly the 1.4 Ω mesh mark before the profile flattens and a swap makes sense. In Liverpool, availability of the 1.4 Ω mesh coil is the practical bottleneck, not the device itself. The standard bore mouthpiece is comfortable over long sessions and resists the condensation that gathers on narrower tips.
For diy mixers, the learning curve is shorter than the specification list suggests, and daily use is straightforward from the first charge. If you take one thing from this page, make it the coil compatibility check. A device that needs a coil you cannot source locally becomes an expensive ornament within a month. The throat hit is noticeably firmer than a 20:80 PG/VG blend, so if you prefer a smoother draw, mix accordingly.
Specifications
These are the figures that matter day to day, and the ones worth comparing across models.
| Reference model | Innokin X |
|---|---|
| Brand family | Asvape |
| Battery capacity | 800 mAh |
| Power range | 60 W |
| Liquid capacity | 3.0 ml |
| Coil | 1.4 Ω mesh |
| Bottle size | 1.3 ml |
| Liquid ratio | 20:80 PG/VG |
| Nicotine strength | 10 mg/ml |
| Material | polycarbonate |
| Charge port | Micro-USB |
| Connector | 510-X |
| Airflow | dual bottom |
| Mouthpiece | standard bore |
Flavour and performance notes
A representative profile is Kiwi Lime: tangy, green, described as tart kiwi balanced by lime. On a 20:80 PG/VG ratio this reads clearly on the first day and holds its character to roughly the 1.4 Ω mesh mark before the coil begins to mute it.
Practical considerations in Liverpool
Availability in Liverpool is the factor that decides most outcomes here. Confirm the 1.4 Ω mesh and the Micro-USB are both in stock before committing, and check that the 510-X matches your existing device if you already own hardware. Duty and GBP rates move, so treat prices as current rather than fixed.
If you would rather talk it through, use the contact details below and we will answer directly.
