Everything about Tanks and clearomizers in Liverpool (Raspberry Lemonade)
Tanks and clearomizers advice for Liverpool, covering delivery, what to look for and where the trade-offs actually sit.
Most Liverpool buyers start with a well-known brand name and then discover that fit and coil availability matter far more. Comparing this against a 55:45 PG/VG setup shows the difference clearly: one favours flavour, the other favours volume.
We spent weeks putting tanks and clearomizers options through their paces so the recommendations here reflect real use. Airflow control on the Innokin X is adjustable enough to move from a warm, restrained draw to something far more open without removing the tank.
What surprised us most was how little the 1.0 Ω mesh coil changes the draw character compared with the 55:45 PG/VG liquid sitting in the chamber. The Arctic White finish hides fingerprints far better than the gloss options, which matters more than it sounds on a device handled daily. Worth noting that the magnetic contact takes a small amount of care to keep clean, which we cover in the maintenance section below.
Battery behaviour is where the Innokin X earns its keep: the 800 mAh cell holds a usable charge for most of a day at 150 and recharges over USB-C. We would pair the Innokin X with a 55:45 PG/VG liquid, which is where the balance between throat hit and cloud density sits most comfortably. Replacement coils are widely available, and the 1.0 Ω mesh coil is the sensible default to keep in stock.
Vapour production is more than adequate at 150, and pushing beyond that adds heat rather than anything worth carrying. Materials are unremarkable on paper and feel reassuringly solid in the hand, with no flex in the body at all. The instruction booklet is thin, but the diagrams are clear enough that most people set the device up without further help.
For nic salt users, the learning curve is shorter than the specification list suggests, and daily use is straightforward from the first charge. If you take one thing from this page, make it the coil compatibility check. A device that needs a coil you cannot source locally becomes an expensive ornament within a month. The throat hit is noticeably firmer than a 55:45 PG/VG blend, so if you prefer a smoother draw, mix accordingly.
Delivery across Liverpool is typically two to four working days with tracked dispatch, and returns are straightforward within the standard window. The included spare coils are useful for the first fortnight, after which you will be ordering your own. What surprised us most was how little the 1.0 Ω mesh coil changes the draw character compared with the 55:45 PG/VG liquid sitting in the chamber.
The 8.0 ml capacity is a genuinely useful middle ground: enough liquid for a long session without turning the device into a pocket problem. Expect roughly 1086 full puffs from a charge at 6 mg/ml, based on average session length in our testing. Replacement coils are widely available, and the 1.0 Ω mesh coil is the sensible default to keep in stock.
Specifications
Specifications vary by batch, so treat these figures as the reference point rather than a guarantee for every unit.
| Reference model | Innokin X |
|---|---|
| Brand family | Hcigar |
| Battery capacity | 800 mAh |
| Power range | 150 W |
| Liquid capacity | 8.0 ml |
| Coil | 1.0 Ω mesh |
| Bottle size | 50 ml |
| Liquid ratio | 55:45 PG/VG |
| Nicotine strength | 6 mg/ml |
| Material | ABS + glass |
| Charge port | USB-C |
| Connector | magnetic contact |
| Airflow | mesh window |
| Mouthpiece | mesh tip |
Flavour and performance notes
A representative profile is Lemon Lime Soda: citrusy, crisp, described as zesty lemon over lime with gentle carbonation. On a 55:45 PG/VG ratio this reads clearly on the first day and holds its character to roughly the 1.0 Ω mesh mark before the coil begins to mute it.
Practical considerations in Liverpool
Availability in Liverpool is the factor that decides most outcomes here. Confirm the 1.0 Ω mesh and the USB-C are both in stock before committing, and check that the magnetic contact matches your existing device if you already own hardware. Duty and GBP rates move, so treat prices as current rather than fixed.
If you would rather talk it through, use the contact details below and we will answer directly.