Tanks and clearomizers reviews: tested in Liverpool (v11)
Tanks and clearomizers advice for Liverpool, covering value analysis, what to look for and where the trade-offs actually sit.
Budget matters in Liverpool, but with tanks and clearomizers the cheapest option is rarely the one that lasts. If you take one thing from this page, make it the coil compatibility check. A device that needs a coil you cannot source locally becomes an expensive ornament within a month.
There is no single best tanks and clearomizers for everyone in Liverpool, and anyone telling you otherwise is selling something. We would pair the Innokin X with a 30:70 PG/VG liquid, which is where the balance between throat hit and cloud density sits most comfortably.
Replacement coils are widely available, and the 1.4 Ω mesh coil is the sensible default to keep in stock. The included spare coils are useful for the first fortnight, after which you will be ordering your own. What surprised us most was how little the 1.4 Ω mesh coil changes the draw character compared with the 30:70 PG/VG liquid sitting in the chamber.
Charging over Micro-USB takes about 56 from empty, and the pass-through means the device can be used while plugged in on the smaller batteries. Two things to check before ordering: the Micro-USB socket on the base and whether the 1.4 Ω mesh coil is the newer generation. Battery behaviour is where the Innokin X earns its keep: the 5000 mAh cell holds a usable charge for most of a day at 200 and recharges over Micro-USB.
Pricing in Liverpool shifts with import duty, so the figures here reflect current GBP rates rather than a fixed list price. Airflow control on the Innokin X is adjustable enough to move from a warm, restrained draw to something far more open without removing the tank. Vapour production is more than adequate at 200, and pushing beyond that adds heat rather than anything worth carrying.
For rechargeable users, the learning curve is shorter than the specification list suggests, and daily use is straightforward from the first charge. If you take one thing from this page, make it the coil compatibility check. A device that needs a coil you cannot source locally becomes an expensive ornament within a month. The throat hit is noticeably firmer than a 30:70 PG/VG blend, so if you prefer a smoother draw, mix accordingly.
The instruction booklet is thin, but the diagrams are clear enough that most people set the device up without further help. Flavour tracking stays consistent from the first day to roughly the 1.4 Ω mesh mark before the profile flattens and a swap makes sense. In Liverpool, availability of the 1.4 Ω mesh coil is the practical bottleneck, not the device itself.
Specifications
These are the figures that matter day to day, and the ones worth comparing across models.
| Reference model | Innokin X |
|---|---|
| Brand family | Joyetech |
| Battery capacity | 5000 mAh |
| Power range | 200 W |
| Liquid capacity | 5.0 ml |
| Coil | 1.4 Ω mesh |
| Bottle size | 100 ml |
| Liquid ratio | 30:70 PG/VG |
| Nicotine strength | 3 mg/ml |
| Material | anodised aluminium |
| Charge port | Micro-USB |
| Connector | 510 thread |
| Airflow | mesh window |
| Mouthpiece | narrow bore |
Flavour and performance notes
A representative profile is Cherry Lime Soda: sweet, tart, described as red cherry with a lime lift. On a 30:70 PG/VG ratio this reads clearly on the first day and holds its character to roughly the 1.4 Ω mesh mark before the coil begins to mute it.
Practical considerations in Liverpool
Availability in Liverpool is the factor that decides most outcomes here. Confirm the 1.4 Ω mesh and the Micro-USB are both in stock before committing, and check that the 510 thread matches your existing device if you already own hardware. Duty and GBP rates move, so treat prices as current rather than fixed.
Our advice is to order one, use it for a fortnight, and only then decide whether to stock up.
