Everything about Tanks and clearomizers in Liverpool (1000 mAh) (v3)

Tanks and clearomizers advice for Liverpool, covering power output, what to look for and where the trade-offs actually sit.

We spent weeks putting tanks and clearomizers options through their paces so the recommendations here reflect real use. The Graphite finish hides fingerprints far better than the gloss options, which matters more than it sounds on a device handled daily.

We spent weeks putting tanks and clearomizers options through their paces so the recommendations here reflect real use. The Graphite finish hides fingerprints far better than the gloss options, which matters more than it sounds on a device handled daily.

Replacement coils are widely available, and the 0.6 Ω mesh coil is the sensible default to keep in stock. The included spare coils are useful for the first fortnight, after which you will be ordering your own. What surprised us most was how little the 0.6 Ω mesh coil changes the draw character compared with the 60:40 PG/VG liquid sitting in the chamber.

Worth noting that the magnetic contact takes a small amount of care to keep clean, which we cover in the maintenance section below. For budget shoppers, the learning curve is shorter than the specification list suggests, and daily use is straightforward from the first charge. If you take one thing from this page, make it the coil compatibility check. A device that needs a coil you cannot source locally becomes an expensive ornament within a month.

Battery behaviour is where the Geekvape Aegis earns its keep: the 800 mAh cell holds a usable charge for most of a day at 120 and recharges over Micro-USB. We would pair the Geekvape Aegis with a 60:40 PG/VG liquid, which is where the balance between throat hit and cloud density sits most comfortably. Replacement coils are widely available, and the 0.6 Ω mesh coil is the sensible default to keep in stock.

Two things to check before ordering: the Micro-USB socket on the base and whether the 0.6 Ω mesh coil is the newer generation. The 6.5 ml capacity is a genuinely useful middle ground: enough liquid for a long session without turning the device into a pocket problem. If you take one thing from this page, make it the coil compatibility check. A device that needs a coil you cannot source locally becomes an expensive ornament within a month.

Build quality is the quiet differentiator here, with tight seams and a connector that has not loosened after repeated removal. The Graphite finish hides fingerprints far better than the gloss options, which matters more than it sounds on a device handled daily. Worth noting that the magnetic contact takes a small amount of care to keep clean, which we cover in the maintenance section below.

Comparing this against a 60:40 PG/VG setup shows the difference clearly: one favours flavour, the other favours volume. Vapour production is more than adequate at 120, and pushing beyond that adds heat rather than anything worth carrying. If you take one thing from this page, make it the coil compatibility check. A device that needs a coil you cannot source locally becomes an expensive ornament within a month.

Specifications

Specifications vary by batch, so treat these figures as the reference point rather than a guarantee for every unit.

Flavour and performance notes

A representative profile is Pineapple Ice Cream: creamy, sweet, described as dairy-style pineapple dessert. On a 60:40 PG/VG ratio this reads clearly on the first day and holds its character to roughly the 0.6 Ω mesh mark before the coil begins to mute it.

Practical considerations in Liverpool

Availability in Liverpool is the factor that decides most outcomes here. Confirm the 0.6 Ω mesh and the Micro-USB are both in stock before committing, and check that the magnetic contact matches your existing device if you already own hardware. Duty and GBP rates move, so treat prices as current rather than fixed.

Questions about a specific configuration? Send the model name and we will confirm the parts that fit.