Cell Capacity Tanks and clearomizers explained (8.0 ml)
Tanks and clearomizers advice for Liverpool, covering cell capacity, what to look for and where the trade-offs actually sit.
Most Liverpool buyers start with a well-known brand name and then discover that fit and coil availability matter far more. In Liverpool, availability of the 0.6 Ω mesh coil is the practical bottleneck, not the device itself.
Most Liverpool buyers start with a well-known brand name and then discover that fit and coil availability matter far more. Battery behaviour is where the Innokin X earns its keep: the 2000 mAh cell holds a usable charge for most of a day at 65 and recharges over USB-C.
The build quality on Innokin X is a step above most of what sits in the same price bracket, and the finish resists the chipping that usually shows after a few months of pocket carry. Build quality is the quiet differentiator here, with tight seams and a connector that has not loosened after repeated removal. Charging over USB-C takes about 74 from empty, and the pass-through means the device can be used while plugged in on the smaller batteries.
The mesh tip mouthpiece is comfortable over long sessions and resists the condensation that gathers on narrower tips. Comparing this against a 35:65 PG/VG setup shows the difference clearly: one favours flavour, the other favours volume. The 2.5 ml capacity is a genuinely useful middle ground: enough liquid for a long session without turning the device into a pocket problem.
Airflow control on the Innokin X is adjustable enough to move from a warm, restrained draw to something far more open without removing the tank. Vapour production is more than adequate at 65, and pushing beyond that adds heat rather than anything worth carrying. Expect roughly 1267 full puffs from a charge at 6 mg/ml, based on average session length in our testing.
We would pair the Innokin X with a 35:65 PG/VG liquid, which is where the balance between throat hit and cloud density sits most comfortably. Replacement coils are widely available, and the 0.6 Ω mesh coil is the sensible default to keep in stock. The included spare coils are useful for the first fortnight, after which you will be ordering your own.
Specifications
The specification sheet is where the real trade-offs show.
| Reference model | Innokin X |
|---|---|
| Brand family | Vapouriz |
| Battery capacity | 2000 mAh |
| Power range | 65 W |
| Liquid capacity | 2.5 ml |
| Coil | 0.6 Ω mesh |
| Bottle size | 1.6 ml |
| Liquid ratio | 35:65 PG/VG |
| Nicotine strength | 6 mg/ml |
| Material | ABS + glass |
| Charge port | USB-C |
| Connector | 510 thread |
| Airflow | dual bottom |
| Mouthpiece | mesh tip |
Flavour and performance notes
A representative profile is Coconut Pineapple: creamy, tropical, described as smooth coconut layered over pineapple. On a 35:65 PG/VG ratio this reads clearly on the first day and holds its character to roughly the 0.6 Ω mesh mark before the coil begins to mute it.
Practical considerations in Liverpool
Availability in Liverpool is the factor that decides most outcomes here. Confirm the 0.6 Ω mesh and the USB-C are both in stock before committing, and check that the 510 thread matches your existing device if you already own hardware. Duty and GBP rates move, so treat prices as current rather than fixed.
If any of the above addresses what you were trying to solve, the rest of the pages in this section cover it in more detail.
