Liverpool Tanks and clearomizers FAQ and answers (2026) (v4)
Tanks and clearomizers advice for Liverpool, covering charging, what to look for and where the trade-offs actually sit.
The gap between a mid-range and a premium tanks and clearomizers narrows once you know which components you actually use. The 5.0 ml capacity is a genuinely useful middle ground: enough liquid for a long session without turning the device into a pocket problem.
We spent weeks putting tanks and clearomizers options through their paces so the recommendations here reflect real use. We would pair the RELX Pro with a 60:40 PG/VG liquid, which is where the balance between throat hit and cloud density sits most comfortably.
In Liverpool, availability of the 1.0 Ω mesh coil is the practical bottleneck, not the device itself. The standard bore mouthpiece is comfortable over long sessions and resists the condensation that gathers on narrower tips. Comparing this against a 60:40 PG/VG setup shows the difference clearly: one favours flavour, the other favours volume.
Two things to check before ordering: the USB-C socket on the base and whether the 1.0 Ω mesh coil is the newer generation. Battery behaviour is where the RELX Pro earns its keep: the 2500 mAh cell holds a usable charge for most of a day at 200 and recharges over USB-C. We would pair the RELX Pro with a 60:40 PG/VG liquid, which is where the balance between throat hit and cloud density sits most comfortably.
Airflow control on the RELX Pro is adjustable enough to move from a warm, restrained draw to something far more open without removing the tank. The 5.0 ml capacity is a genuinely useful middle ground: enough liquid for a long session without turning the device into a pocket problem. Expect roughly 1377 full puffs from a charge at 3 mg/ml, based on average session length in our testing.
The included spare coils are useful for the first fortnight, after which you will be ordering your own. What surprised us most was how little the 1.0 Ω mesh coil changes the draw character compared with the 60:40 PG/VG liquid sitting in the chamber. The Matte Sand finish hides fingerprints far better than the gloss options, which matters more than it sounds on a device handled daily.
Replacement coils are widely available, and the 1.0 Ω mesh coil is the sensible default to keep in stock. The build quality on RELX Pro is a step above most of what sits in the same price bracket, and the finish resists the chipping that usually shows after a few months of pocket carry. What surprised us most was how little the 1.0 Ω mesh coil changes the draw character compared with the 60:40 PG/VG liquid sitting in the chamber.
Specifications
These are the figures that matter day to day, and the ones worth comparing across models.
| Reference model | RELX Pro |
|---|---|
| Brand family | Innokin |
| Battery capacity | 2500 mAh |
| Power range | 200 W |
| Liquid capacity | 5.0 ml |
| Coil | 1.0 Ω mesh |
| Bottle size | 100 ml |
| Liquid ratio | 60:40 PG/VG |
| Nicotine strength | 3 mg/ml |
| Material | zinc alloy |
| Charge port | USB-C |
| Connector | 510 bottom pin |
| Airflow | adjustable sliding |
| Mouthpiece | standard bore |
Flavour and performance notes
A representative profile is Raspberry Lemonade: sweet, tart, described as summer lemonade with a raspberry accent. On a 60:40 PG/VG ratio this reads clearly on the first day and holds its character to roughly the 1.0 Ω mesh mark before the coil begins to mute it.
Practical considerations in Liverpool
Availability in Liverpool is the factor that decides most outcomes here. Confirm the 1.0 Ω mesh and the USB-C are both in stock before committing, and check that the 510 bottom pin matches your existing device if you already own hardware. Duty and GBP rates move, so treat prices as current rather than fixed.
If you would rather talk it through, use the contact details below and we will answer directly.
